BM503-S Multi function busbar processing machine

This busbar processing machine can allow three work station(punching shearing and bending) to work at the same time.

Busbar multi-function processing machine

Model: BM503-S

Part 1:Main features :

 

2. For punching unit, it is very convenient to withdraw& change toolings.

3. The cutting unit adopts punching shear method, the verticality of the end surface is guaranteed, no deformation of workpiece and the end surface is bright and good appearance.

simultaneous work of the three work stations and avoids the interference of each other.  and has cooling functions.

 

 

Part 2:Main parameters

 

Work table dimension(mm)	Machine weight(kg)	Motor QTY	Total Motor Power(KW)	Work voltage	Hydraulic Station QTY*SPEC.(Mpa)
1PstP:1500*1200 2PndP:840*370	1500	3+1	11.47	380V	3*31.5
Control method: PLC+ Bending angle NC control
Punching unit
Item	Unit	Material	Thickness(mm)	Max. Diameter of Punching hole
Punching capacity	mm	Copper/Aluminum	15/15	25mm
Max. Punching Force	KN	500
Cylinder stroke	mm	50
Cutting unit
Item	Unit	Material	Max. Thickness(mm)	Max. Width
Cutting capacity	mm	Copper/Aluminum	15/15	160/160
Max. cutting Force	KN	500
Cylinder stroke	mm	50
Bending unit (Bending angle NC control)
Item	Unit	Material	Max. Thickness(mm)	Max. Width	Bending accuracy
Bending capacity	mm	Copper/Aluminum	15/15	160/160	+/- 0.5º
Max. bending Force	KN	350
Cylinder stroke	mm	240
The max. processing dimension when doing vertical bending: width*thickness=100mm*10mm

Part 3: General description of each work unit

Punch UnitFast change of die is realized without any requirement on tool, and the machine can finish round hole punch, oblong hole punch, double hole punch, embossing, copper bar press and copper bar shear etc.

 

 

Shear Unit

Two kinds of shearing method for your choice.-punching shear and single shearing.

For punching shear the verticality of the end surface is guaranteed, no deformation of workpiece and the end surface is bright and good appearance. But it wastes the raw material a little.

For single shear, there is a little bevel angle on the work piece but it wastes no raw material.

 

 

Bend Unit

Plain (horizontal) bending, vertical bending ,elbow pipe bending, connecting terminal and copper busbar bending etc can be carried out via changing of die. The die is simple and easy to change.

 

 

 

Part 4: Accompanying standard toolings:

Punching

Round and oblong holes total 8 sets, size as per customer’s requirement

Vertical bending 1 setHorizontal bending 1 setEmbossing 1 setCutting 1 set 

Note: The connecting terminal die is not included in the standard tooling, if it is needed, pls inform us cable sizes.

 

BM503-S Multi function busbar processing machine